Leistungen 2018-01-22T08:58:56+00:00


We take a holistic approach to the subject of light – on request, we are able to provide you with everything from one single source!



We use a profitability calculation to check in advance how quickly your lighting system can be converted to LED technology:

The calculation shows you the ROI (return of investment) of your project and thus – together with the lighting design – provides the basis for an informed decision making.

The payback calculation compares the performance data and acquisition costs of the conventional lamps used with those of our LED products. The period of use and electricity costs are also recorded and evaluated.



Not all light is the same!

The qualification of light is becoming a decisive factor for an increasing number of industries. In the implementation of lighting systems, an extended measurement of light quality is becoming increasingly important. Whereas it used to be sufficient to check the illuminance and luminance of conventional lighting technology, today it is also necessary to look at the spectrum, colour location, colour temperature, colour rendering indices and flicker.

With the help of our professional spectrometer, we precisely determine all relevant factors of your light and give you the assurance that your requirements will be fulfilled.




Careful analysis and professional light planning are the basis for optimal lighting systems with maximum quality and energy efficiency. Professional planning ensures that the planned lighting solutions will also achieve the desired illuminance and light distribution in later use.

It is important to comply with the technical regulations for workplaces (ASR) when planning, to ensure the legal provisions for the health and safety of employees. The corresponding regulations can be found in DIN EN 12464-1 and DIN EN 12464-2 as well as in the Workplace Policy. This defines how much light should be available, how it should be distributed and how glare should be limited.





Whether it’s a new planning or a retrofit: an analysis of the room’s condition is necessary to calculate the optimum lighting conditions. We use the floor plan of your area and all lighting relevant conditions. Also furnishings like e. g. shelving and machinery as well as pillars and windows influence the lighting level and must be taken into account.

As soon as the room is simulated, the light data of the defined products are read in as IES files and the lamps are placed. Only lamps that have been measured by photometric technology can be planned. For our products IES-files are available, which contain all the lighting parameters relevant for the planning. We provide theses light data to lighting designers and architects.

The simulation of the planned lighting installation provides information on luminous intensity and distribution of the lighting. This enables us to evaluate the light distribution and make any necessary changes.

On the basis of our planning, we prepare an individual offer for your lighting solution – tailored to your wishes and needs.



An intelligent lighting control system automatically switches and regulates the lighting depending on the available daylight and presence – and thus offers considerable savings potential.

Energy-efficient lighting management enables the energy-saving use of light: light is only used where it is needed – and only as much as is actually needed. The combination of LED products with lighting management systems ensures even better energy efficiency.

Various sensor modules can be integrated as signal transmitters in greenius® LED lamps. The values or states they capture are processed in an associated control system so that they react to the actual lighting requirements.

Daylight-dependant control through light sensors

Motion-activated control and circuit

Light sensors measure the current lighting situation in the room and control the dimming of the LED lamps depending on the amount of daylight. The artificial light is continuously adjusted to the available daylight so that the brightness remains constant.

Motion and presence sensors register the presence or absence of persons through an infrared sensor and enable automatic control (switching on and off and/or dimming) of the lighting system. They are particularly suitable for rooms with little or very different levels of traffic.

Daylight-dependent lighting requires considerably less energy than conventional lighting solutions that are not optimized for consumption. Time and presence sensors further reduce consumption.



We will also support you with the installation and commissioning of our LEDs. If required, we will place you in contact with a known electrical company or have the installation carried out by our own installation team (Electrical Engineer).

Should you wish to see the quality and technical features of greenius® LEDs in advance, we can provide you with samples for a free test installation in the porposed environment. Please do not hesitate to contact us.



“Do good and talk about it!”

After successful conversion to greenius® LEDs, you will receive our greenius® certificate made of acrylic glass as well as appropriate stickers, which you can use for your internal and external corporate communication.

After all, environmentally conscious management is more important today than ever before! And by upgrading to energy-saving greenius® LED lamps, you make a sustainable contribution to climate and environmental protection and significantly optimise your ecological and economic balance sheet.